Sea Technology

SEP 2013

The industry's recognized authority for design, engineering and application of equipment and services in the global ocean community

Issue link:

Contents of this Issue


Page 38 of 79

VENUS Subsea Cabled Observatory Infrastructure Repaired Bringing the System Back Into Operation in the Strait of Georgia By Matthew Stewart • Adrian Round A failure occurred in a key component of the Victoria Experimental Network Under the Sea (VENUS) portion of the Ocean Networks Canada (ONC, based in Victoria, Canada) subsea cabled observatory in August 2012. The Strait of Georgia array of the observatory, located near Vancouver, Canada, was brought down by the failure of a critical subsea connector. In February 2013, aboard the cable ship (CS) Wave Venture, a joint team from OceanWorks International Corp. (Burnaby, Canada), the University of Victoria and Global Marine Systems Ltd. (Chelmsford, England) successfully repaired this segment of the network by recovering major components, replacing damaged parts and redeploying the system. The VENUS Observatory is operated by ONC, an initiative of the University of Victoria, and its frst node was deployed in the Saanich Inlet in early 2006. The observatory has been collecting data continuously for more than seven years and is helping to push the boundaries of ocean science. Many disciplines have benefted from scientifc experiments conducted on VENUS, which have covered diverse areas such as forensics, sediment dynamics, physical and chemical oceanography, and benthic ecology. The fexibility of high-bandwidth, high-power cabled observatories is proving to be a powerful research tool. The Strait of Georgia array of the cabled observatory, deployed between May 2007 and February 2008, consists of a shore cable landing station and two nodes: the Central Node (300-meter depth) and the East Node (170-meter depth). All power and communications are provided from the shore station. A 30-kilometer cable connects the shore station to the Central Node. From the Central Node, an additional 9 kilometers of cable connects the power and communications with the East Node. Removable Pod Concept Each VENUS node houses electronics for high-power distribution and high-bandwidth data communication. To facilitate maintenance, OceanWorks designed the nodes to be divided into two major physical components: the node base and the node pod. The node base is a heavy steel structure that acts as a termination for the subsea fber-optic cable. It is intended to be a permanent installation not nor- The new cable termination and node junction can are inspected prior to fnal assembly and installation. mally recovered during the life of the observatory. Due to the permanent nature of the installation, the complexity of the node base has been minimized. It contains only small pressure vessels interconnecting the subsea fber-optic cable and the ROV mateable optical fber and electrical connectors. The node pod contains all the components that might need maintenance or upgrades over the 20-year life of the observatory. Larger pressure vessels house all of the node power and communication electronics and provide eight ROV mateable interfaces to science instruments. The node pod is designed to be removed from the node base by ROV for upgrade or maintenance. It is mechanically connected to the node base by a series of ROV operable latches and electro-optically connected by a pair of ROV mateable connectors. The utility of this design has already been proven when each VENUS node pod was recently recovered for an engineering upgrade to improve electronics and increase the number of science ports. Continual Learning And Risk Mitigation As with most leading-edge ocean engineering projects, both the initial budget and project time lines were tight. The September 2013 / st 39

Articles in this issue

Links on this page

Archives of this issue

view archives of Sea Technology - SEP 2013